Diseño y fabricación de un prototipo distribuidor de componentes automatizado mediante el uso de una impresora 3D para transportar insumos de bodega hacia una línea de producción.
Keywords:
prototype; sensors; automated system; distribution times; 3D printing.Abstract
El diseño del prototipo automatizado de
distribución de insumos se lo lleva a cabo con un
Software CAD, con ayuda de la impresión 3D se
fabrica sus componentes. La parte electrónica
cuenta con un sensor TCR5000 colocado en la
parte inferior se encarga de sensar la línea negra
que se encuentra por debajo, esta a su vez sirve
como guía para definir el recorrido y el
desplazamiento que realiza, el sensor óptico
colocado en la parte frontal detecta los obstáculos
que se atraviesan en su camino, después de ser
retirado prosigue con su recorrido a través de las
cuatro etapas definidas en la línea de producción.
Con estos elementos se integra el distribuidor a
una línea de producción, se realiza una
comparación entre una distribución manual y una
automatizada considerando funcionamiento,
desempeño y tiempos de distribución.
Este distribuidor tiene un sistema automatizado
que reduce los esfuerzos físicos que conlleva una
manual, mejora el control de almacenamiento de
materiales en stock de bodega y a su vez se
asegura una mayor calidad del proceso,
disminuyendo los errores humanos
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 BRYAN ALEXANDER SACAN MORALES
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
COPYRIGHT
The ISTCT Technological Research journal is an Open Access publication, whose contents are disseminated under a Creative Commons Attribution-Non-Commercial license (CC-BY NC 4.0 International). All articles published in the ISTCT Technological Research journal are published in Open Access and are available online for free immediately after publication.
This journal provides metadata for third-party indexing services through the open files initiative.
The ISTCT Technological Research journal recognizes and respects the moral rights of the authors, as well as the ownership of the patrimonial right, which will be transferred non-exclusively to the journal to allow its legal dissemination in Open Access.
The ISTCT Technological Research journal does not reserve the rights to publish articles. Authors may distribute their own material in any other medium or medium, as long as it is for non-commercial purposes, informing the editors that the work will be published again and giving the corresponding credit to the ISTCT Technological Research journal.
Authors can make other independent and additional contractual agreements for the distribution of the article published in this journal (e.g., include it in an institutional repository or publish it in a book) as long as they clearly indicate that the work was published for the first time in "ISTCT Technological Research Magazine". In the case of reproduction, a note similar to the following must be included:
"This text was originally published in REVISTA DE INVESTIGACIÓN TECNOLÓGICA ISTCT N ° -, section -----, number of pages, year of publication."
Authors are recommended to publish their work on the Internet (for example on institutional or personal pages) in the final version published by REVISTA DE INVESTIGACIÓN TECNOLÓGICA ISTCT, as it may lead to a greater and faster dissemination of the published work (see The Effect of Open Access).
The publications in this magazine, due to their free nature, do not entitle the authors to any financial remuneration.
